Design of Automatic Fan Base On Arduino Uno Microcontroler And   DHT11 Sensor

Muhammad Sakban Batubara; Purnama Helena   Hutabarat

doi:10.36378/jtos.v8i2.5012

Muhammad Sakban Batubara AMIK Parbina Nusnatara
Purnama Helena Hutabarat Information Management, Amik Parbina Nusantara, Indonesia

DOI: https://doi.org/10.36378/jtos.v8i2.5012

Keywords: Arduino uno, DHTII sensor, Fan, Microcontroller, Temperatur and humadity

Abstract

The temperature of the human body can fluctuate depending on environmental conditions, particularly the surrounding room temperature. To maintain comfort, a cooling device capable of providing adequate airflow is required, and one commonly used solution is an electric fan. This study focuses on designing and implementing an automatic fan system controlled by an Arduino Uno microcontroller and a DHT11 temperature sensor. The system is programmed to activate the fan automatically when the detected room temperature exceeds a predetermined threshold. In the design phase, the Arduino Uno functions as the core controller due to its ability to process sensor input and manage hardware operations efficiently. The DHT11 sensor measures both temperature and humidity, transmitting the data to the microcontroller, which then delivers a control signal to the relay module. Following the design stage, system implementation is carried out using the C++ programming language through the Arduino IDE. The program continuously reads temperature values from the DHT11 sensor, enabling real-time decision-making. When the temperature reaches the specified limit, the microcontroller triggers the relay, causing the fan to operate automatically. The results of this study show that the fan responds accurately to temperature changes, providing a practical automatic cooling solution.

Downloads

Download data is not yet available.

References

S. Novita Sari1, De~nok Wulandari, “Pe~ne~rapan Algoritma Fuzzy Mamdani pada Monitoring dan Siste~m Kontrol Pe~makaian Kipas Angin di Ruangan Be~rbasis Inte~rne~t Of Things,” Proce~ss. J. Ilm. Sist. Informasi, Te~knol. Inf. dan Sist. Komput., vol. 19, no. 2, pp. 255–268, 2024.

P. H. E~rwan E~ffe~ndy, Nur Baiti, “Pe~ngambilan Ke~putusan Siste~m Informasi Manaje~me~n Dakwah,” J. Pe~ndidik. dan Konse~ling, vol. 5, no. 2, pp. 4314–4320, 2023.

O. A. Lobitos, K. D. Oliva, R. M. A. Doria, and M. K. C. Porquillo, “Fan Mobility by Ge~ne~rate~d E~le~ctricity Harne~sse~d from Dynamo,” J. E~ne~rgy E~ng. The~rmodyn., vol. 04, no. 03, pp. 1–11, 2024.

I. M. R. Rizal, T.M Johan, “Kipas angin pe~nde~te~ksi suhu be~rbasis arduino uno,” J. TIKA Fak. Ilmu Komput. Unive~sitas Almuslim Bire~ue~n - Ace~h, vol. 4, no. 1, pp. 114–125, 2019.

M. Kotha, N. Valake~e~rthi, and R. Bakkathatla, “Te~mpe~rature~ Base~d Fan Spe~e~d Controlle~r With Human De~te~ction,” IJE~SR, vol. 15, no. 1, pp. 169–180, 2025.

I. L. Rachmat Aulia, Rahmat Aulia Fauzan, “PE~NGE~NDALIAN SUHU RUANGAN ME~NGGUNAKAN,” CE~SS (Journal Comput. E~ng. Syst. Sci., vol. 6, no. 1, pp. 30–38, 2021.

F. Puspasari, T. P. Satya, U. Y. Oktiawati, I. Fahrurrozi, and H. Prisyanti, “Analisis Akurasi Siste~m Se~nsor DHT22 be~rbasis Arduino te~rhadap The~rmohygrome~te~r Standar,” J. Fis. DAN Apl., vol. 16, no. 1, pp. 1–6, 2020.

R. Hidayat, Novriye~nni, and S. Syahputra, “De~sign of a Te~mpe~rature~ Control and Obje~ct Motion De~te~ction Syste~m in the~ Se~rve~r Room Using IOT-Base~d We~mos D1,” J. Artif. Inte~ll. E~ng. Appl., vol. 3, no. 1, pp. 323–327, 2023.

I. D. Rahayu and M. Basri, “Automatic Fan De~sign Base~d on Microcontrolle~r with Combination of DHT11 Se~nsor and Motion Se~nsor,” HANIF J. Inf. Syst., pp. 30–37, 2024.

M. M. Thu, S. S. Swe~, and T. T. Zaw, “Se~curity Syste~m with PIR Se~nsor,” IRE~ Journals, vol. 4, no. 6, pp. 77–82, 2020.

R. S. Rakhonde~, P. R. Lakde~, S. K. Badwaik, A. B. Ronghe~, D. P. Sonule~, and A. P. C. J. She~nde~, “A Re~vie~w on Role~ of Arduino Uno Use~d in Dual Axis Solar Tracke~r,” Int. J. Sci. E~ng. Te~chnol., pp. 1–5, 2021.